Troubleshooting E01 F03 Issue With Whirlpool Washer

How to troubleshoot the E01 F03 issue with Whirlpool washer?

Answer:

The E01 F03 error code on a Whirlpool washer indicates a problem with the water level. This can be caused by a faulty sensor, hose, or air trap pipe.

To troubleshoot the issue, follow these steps:

1. Reset the washer. Unplug the washer for 5 minutes, then plug it back in and try running the cycle again. If the error code still appears, proceed to the next step.
2. Check the switch hose. The switch hose is located between the pressure switch and the air trap pipe. Inspect the hose for any damage, kinks, or clogs. If the hose is damaged, it will need to be replaced.
3. Check the water level sensor. The water level sensor is located in the bottom of the washer. To check the sensor, unplug the washer and remove the access panel. Inspect the sensor for any damage or corrosion. If the sensor is damaged, it will need to be replaced.
4. Check the air trap pipe. The air trap pipe is located at the bottom of the washer. Inspect the pipe for any leaks or clogs. If the pipe is damaged or clogged, it will need to be repaired or replaced.

Additional question:

What are the symptoms of the E01 F03 error code?

Answer:

The symptoms of the E01 F03 error code include:

• The washer will not start a cycle.
• The washer will stop mid-cycle.
• The washer will display the E01 or F03 error code.

How to prevent the E01 F03 error code?

To prevent the E01 F03 error code, follow these tips:

• Use the correct amount of detergent.
• Avoid using too much detergent, as this can create suds that can interfere with the water level sensor.
• Clean the lint filter regularly.
• Inspect the hoses and pipes for any damage or leaks.
• Have the washer serviced by a qualified technician regularly.