Hyundai i10 Oil Change DIY

Regular oil changes are essential for maintaining the performance and longevity of your Hyundai i10. While you can always take your car to a professional mechanic for this service, performing an oil change yourself can be a cost-effective and rewarding experience. In this article, we will provide a step-by-step guide on how to change the oil in your Hyundai i10, saving you time and money.

What You'll Need

• 5 quarts of oil suitable for your car (check the owner's manual for the correct type and viscosity)
• New oil filter
• Oil filter wrench
• Oil drain pan or container
• Socket wrench set
• Funnel
• Rubber gloves

Step 1: Prepare Your Vehicle

Park your Hyundai i10 on a flat surface and engage the parking brake. Allow the engine to cool if it has been recently running.

Step 2: Locate the Oil Drain Plug

Position yourself under the car and locate the oil drain plug, which is typically located towards the rear of the engine oil pan. Consult your owner's manual if you are having trouble finding it.

Step 3: Drain the Old Oil

Place the oil drain pan or container underneath the oil drain plug. Unscrew the drain plug using a socket wrench and let the old oil flow into the container. Wait until all the oil has drained completely before proceeding.

Step 4: Change the Oil Filter

Locate the oil filter, which is usually located near the oil pan or on the side of the engine. Place the drain pan beneath it. Using an oil filter wrench, unscrew the old filter in a counterclockwise direction. Once removed, use a small amount of new oil to lubricate the gasket on the new oil filter. Install the new filter by hand, tightening it securely.

Step 5: Add New Oil

Remove the oil filler cap located on the top of the engine. Insert a funnel into the opening and carefully pour in the new oil. Refer to your owner's manual to find the correct oil capacity for your Hyundai i10. After pouring, replace the oil filler cap tightly.

Step 6: Check the Oil Level

Start your engine and let it run for a few minutes. Turn off the engine and wait for a couple of minutes to allow the oil to settle. Remove the dipstick, wipe it clean with a cloth, then reinsert it and remove it again to check the oil level. Ensure that the oil level is within the designated range on the dipstick. If it is low, add more oil until you reach the correct level.

Step 7: Dispose of the Old Oil Properly

Used motor oil is hazardous waste, so it's important to dispose of it properly. Collect the old oil in a sealed container and take it to a designated oil recycling center or an auto parts store that accepts used oil.

Congratulations! You have successfully changed the oil in your Hyundai i10. Performing this DIY task not only saves you money but also enables you to be more in tune with the maintenance needs of your vehicle. Remember to consult your owner's manual for specific instructions and always prioritize safety.