Eclipse Cross Engine Oil Change Process

Regularly changing the engine oil in your Mitsubishi Eclipse Cross is crucial to maintaining its performance and extending its lifespan. This essential maintenance task helps to keep the engine running smoothly by lubricating its components and reducing friction.

Step 1: Gather the Necessary Tools and Materials

Before starting the oil change process, make sure you have the following tools and materials on hand:

• Wrench or socket set
• Oil filter wrench
• New oil filter
• Drip pan or oil catcher
• Rubber gloves
• New engine oil (check your owner's manual for the recommended type and quantity)
• Funnel

Step 2: Prepare the Vehicle

Park your Eclipse Cross on a level surface and engage the parking brake to ensure it remains in place throughout the oil change process. It's also a good idea to let the engine cool down for a few minutes before proceeding.

Step 3: Locate the Oil Drain Plug

Crawl under the vehicle and locate the oil drain plug. It is usually situated towards the front of the engine oil pan. Once found, place the drip pan or oil catcher beneath it.

Step 4: Drain the Old Oil

Using the wrench or socket set, loosen the oil drain plug in a counterclockwise direction. Be cautious as the oil may be hot. Once fully loosened, carefully remove the plug, allowing the old oil to drain into the pan beneath. Let the oil drain completely.

Step 5: Replace the Oil Filter

Locate the old oil filter, which is typically located adjacent to the drain plug. Place the oil filter wrench around it and loosen it by turning it counterclockwise. Once loose, remove the old oil filter. Before installing the new filter, apply a thin layer of new engine oil to the filter gasket, then screw the new filter into place by hand, ensuring it is adequately tightened.

Step 6: Add New Oil

Using a funnel, carefully pour the recommended amount of new engine oil into the engine oil filler cap located on top of the engine. Check your owner's manual for the correct oil capacity. Once filled, securely replace the oil filler cap.

Step 7: Check the Oil Level

Allow a few moments for the oil to settle, then use the dipstick to check the oil level. Insert the dipstick fully, remove it, and observe the oil level. It should be within the acceptable range indicated on the dipstick. If necessary, add more oil and recheck the level.

Step 8: Clean Up and Dispose of Used Oil Properly

Dispose of the used oil responsibly. Some auto parts stores or service centers accept used oil for recycling. Avoid pouring it down drains or on the ground. Remember to properly clean up any spills or drips to avoid environmental contamination.

Congratulations! You have successfully completed the engine oil change process for your Mitsubishi Eclipse Cross. Regularly following this maintenance procedure will help keep your vehicle's engine in optimal condition.