DIY Oil Change for Infiniti G: Step-by-Step Guide

Regular oil changes play a vital role in maintaining the performance and longevity of your Infiniti G. While taking your car to a professional service center is a convenient option, it can be quite expensive. Performing a DIY oil change not only saves you money but also gives you a deeper understanding of your vehicle's maintenance needs. Follow this step-by-step guide to confidently perform an oil change for your Infiniti G.

What You'll Need:

• Oil Filter
• Replacement Oil (preferably recommended by the manufacturer)
• Socket or Wrench Set
• Oil Drain Pan
• Oil Funnel
• Jacks or Ramps
• Disposable Gloves
• Rags or Paper Towels

Step 1: Prepare Your Vehicle

Ensure your Infiniti G is parked on a level surface and the engine has cooled down. Open the car hood and locate the oil cap.

Step 2: Lift the Vehicle

Use jacks or ramps to elevate the front part of your Infiniti G. Make sure to follow proper safety precautions while lifting the vehicle.

Step 3: Locate and Drain the Oil

Crawl under your vehicle and locate the oil drain plug. Position the oil drain pan beneath it. Use the appropriate socket or wrench to loosen and remove the drain plug. Allow the old oil to drain completely.

Step 4: Replace the Oil Filter

Locate the oil filter, typically positioned near the oil drain plug. Unscrew and remove the existing oil filter. Apply a thin layer of new oil to the gasket of the new oil filter. Screw in the new oil filter by hand until snug.

Step 5: Add New Oil

After ensuring the drain plug is securely tightened, place the oil drain pan aside. Take the new oil and use an oil funnel to pour it into the oil fill cap. Refer to your vehicle manual for the recommended oil capacity. Once filled, securely tighten the oil fill cap.

Step 6: Lower the Vehicle

Carefully lower your Infiniti G using the jacks or ramps to its original position.

Step 7: Double-Check and Clean Up

Inspect the oil drain plug and oil filter for any signs of leakage. If everything appears tight, start the engine and let it run for a few minutes. Check the oil level using the dipstick and adjust if necessary. Finally, clean up any spills or drips and properly dispose of the used oil.

Conclusion

Performing a DIY oil change for your Infiniti G not only helps you save money but also empowers you as a car owner. With proper tools, precautions, and following these step-by-step instructions, you can confidently maintain your vehicle's engine oil, ensuring its optimal performance and longevity.