How to factory reset Samsung washer?

How to Factory Reset Samsung Washer | Step-by-Step Guide

How to Factory Reset Samsung Washer: Step-by-Step Guide

If you are experiencing issues with your Samsung washer or simply want to start afresh, performing a factory reset can be a viable solution. By resetting your washer, you can restore it to its original settings, resolving common problems such as errors, glitches, or malfunctions.

Step 1: Preparation

Before proceeding with the factory reset, ensure that you have completed the following steps:

• Make sure the washer is powered on and connected to a reliable power source.
• Confirm that the washer is not in the middle of any washing cycles.
• Keep in mind that the factory reset procedure may differ slightly based on the specific Samsung washer model you own. Therefore, we recommend referring to the user manual for your specific model.

Step 2: Accessing the Service Menu

In order to perform a factory reset on your Samsung washer, you need to access the service menu. Follow these steps:

1. Press the "Power" button to turn off the washer.
2. Unplug the washer from the power source.
3. Wait for approximately 30 seconds before plugging it back in.
4. Immediately after plugging it in, press and hold the "Delay Start" or "Pre-wash" button along with the "Power" button.
5. Continue holding both buttons until the display screen turns on.
6. Release the buttons once the service menu appears on the screen.

Step 3: Performing the Factory Reset

Now that you have accessed the service menu, it's time to perform the factory reset:

1. Use the navigation buttons or dial on your washer to select the "Factory Reset" option.
2. Press the appropriate button to initiate the reset process (e.g., "Start" or "Confirm").
3. Your Samsung washer will now begin the factory reset process. This may take a few minutes.
4. Once the reset is complete, your washer will restart automatically.

Step 4: After the Factory Reset

After the factory reset, your Samsung washer will be restored to its original default settings. To continue using it, follow these necessary steps:

• Set your preferred language and time zone.
• Adjust any other personalized settings, such as cycle preferences or water temperature.
• Refer to the user manual for your specific washer model to learn about any additional recommended post-reset procedures.

Congratulations! You have successfully performed a factory reset on your Samsung washer. It should now operate as if it were brand new, resolving any issues or errors you were encountering.

Remember, if you ever encounter persistent problems with your washer or need further assistance, don't hesitate to reach out to Samsung's customer support for professional guidance tailored to your device.