How to reset Whirlpool washer control panel?

How to Reset Whirlpool Washer Control Panel

How to Reset Whirlpool Washer Control Panel

If you are experiencing issues with your Whirlpool washer, resetting the control panel can often help resolve minor problems. Resetting the control panel restores the washer to its default settings and clears any error codes.

Step 1: Unplug the Washer

The first step in resetting the Whirlpool washer control panel is to disconnect the power. Unplug the washer from the electrical outlet or turn off the circuit breaker that supplies power to the washer. Wait for a few minutes to allow any residual power to dissipate.

Step 2: Reconnect the Power

Once you have disconnected the power, reconnect it by plugging the washer back into the electrical outlet or turning on the circuit breaker. Ensure that the power supply is stable and functioning properly.

Step 3: Navigate to the Control Panel

Locate the control panel of your Whirlpool washer. It is usually situated at the top of the machine or on the front panel depending on the model. Take a moment to familiarize yourself with the buttons and settings available on the control panel.

Step 4: Reset the Control Panel

Once you are at the control panel, press and hold the "Cancel" or "Reset" button for about 3 seconds. Some models may require a different combination of buttons or a longer duration to reset the control panel. Refer to the owner's manual for specific instructions if needed.

Step 5: Wait for the Reset

After releasing the "Cancel" or "Reset" button, wait for a few seconds to allow the control panel to reset. During this time, the washer may display various lights or indicators as it goes through the reset process. Once the reset is complete, the control panel should be restored to its default settings.

Step 6: Test the Washer

Once the control panel is reset, you can now test the washer to see if the problem has been resolved. Select a desired cycle and start the washer to check if it is functioning properly.

Step 7: Contact Whirlpool Support (if necessary)

If the reset did not solve the issue or if you continue to experience problems with your Whirlpool washer, it is recommended to contact Whirlpool customer support for further assistance. They have the expertise to troubleshoot and provide you with the best guidance for your specific model.

Resetting the control panel of your Whirlpool washer is a simple procedure that can be done to address minor issues. By following the steps outlined above, you can reset the control panel and potentially resolve any problems you are encountering with your washer.