Where is Jeep Commander's oil filter located?

Where is Jeep Commander's oil filter located?

Proper maintenance of your Jeep Commander is crucial to keep its engine in optimal condition. Regularly changing the oil and oil filter is an essential part of this maintenance routine. In order to change the oil filter, you must first locate it. The oil filter in the Jeep Commander can be found in a specific location.

Locating the Oil Filter

The oil filter in the Jeep Commander is located underneath the engine, slightly towards the front. To access it, you will need to raise the vehicle using a jack and secure it with jack stands. Ensure you are working on a flat and level surface, following all necessary safety precautions.

Steps to Access the Oil Filter

Follow these steps to reach the oil filter:

1. Start by locating the oil drain plug, which is usually situated near the bottom of the engine.
2. Place an oil pan or container underneath the drain plug to catch the old oil.
3. Using a wrench, carefully loosen and remove the drain plug to let the old oil drain out completely. Be cautious as the oil may still be hot.
4. Once the oil has drained, replace the drain plug and tighten it securely.
5. Now, locate the oil filter, which is near the oil pan, between the engine and the radiator.
6. Using an oil filter wrench or your hands, carefully unscrew and remove the old oil filter. Make sure to keep a container handy to catch any oil that may drip during removal.
7. Before installing the new oil filter, apply a thin layer of fresh engine oil to the rubber gasket on the top of the filter for a proper seal.
8. Screw on the new oil filter by hand, ensuring it is tightened securely. Be careful not to overtighten, as it may cause damage.

Remember to properly dispose of the used oil and filter at an authorized recycling center or auto parts store.

Conclusion

Knowing the location of the oil filter in your Jeep Commander is important to perform regular oil changes and to maintain the vehicle's engine health. By following the steps outlined above, you can easily access and replace the oil filter, ensuring that your Jeep Commander continues to run smoothly for years to come.