How to check tire pressure on Subaru Levorg?

The proper inflation of your Subaru Levorg's tires is crucial for maintaining optimal vehicle performance, safety, and fuel efficiency. Checking your tire pressure regularly is a simple yet important task that every Levorg owner should prioritize. In this article, we will guide you through the necessary steps to check the tire pressure on your Subaru Levorg.

Step 1: Gather Required Tools

Before you begin, make sure you have the following tools at your disposal:

• Tire pressure gauge
• Air compressor or an air pump

Step 2: Find the Tire Pressure Recommendations

To ensure you're inflating your Levorg's tires to the correct pressure, it is essential to refer to the manufacturer's guidelines. You can find this information in multiple sources:

• Owner's Manual: The tire pressure recommendations are typically listed in the manual provided with your Subaru Levorg.
• Inside Fuel Door: Sometimes, you can find the tire pressure specifications on a sticker located inside the fuel door.
• Online: If you are unable to locate the information physically, you can also search for the tire pressure recommendations specific to your Subaru Levorg model online.

Step 3: Prepare the Tires

Before measuring the tire pressure, ensure the following:

• Your vehicle should be stationary and parked on a level surface.
• The engine should be turned off.
• Your Levorg's tires should be cool to the touch. It is recommended to check the pressure in the morning or after the vehicle has been parked for a few hours.

Step 4: Remove Valve Stem Caps

Locate and remove the valve stem caps from all four tires of your Subaru Levorg. Keep them in a secure place to avoid misplacing them during the process.

Step 5: Check the Tire Pressure

Take your tire pressure gauge and firmly press it onto the valve stem of the first tire. Ensure the gauge is making a proper seal with the valve stem to prevent air leakage. The gauge will display the current tire pressure reading.

Step 6: Compare with Manufacturer's Recommendations

Compare the tire pressure reading you obtained with the recommended pressures specified by the manufacturer. If the measured pressure is lower, you will need to add air to the tire. If it is higher, you need to release some air until it reaches the recommended level.

Step 7: Inflate or Deflate Tires

If your Levorg's tire pressure is too low, use an air compressor or air pump to gradually inflate the tire with the appropriate amount of air. In case the pressure is too high, use a suitable tool to carefully release air from the tire until it reaches the desired pressure.

Step 8: Repeat for All Tires

Repeat steps 5 to 7 for all remaining tires of your Subaru Levorg, ensuring each tire reaches the recommended pressure level.

Step 9: Reinstall Valve Stem Caps

After achieving the recommended tire pressures for each tire, reinstall the valve stem caps securely. This will help prevent dirt and debris from entering the valve stems and ensure their protection.

Step 10: Monitor Tire Pressure Regularly

Now that you have successfully checked and adjusted the tire pressure on your Subaru Levorg, it is good practice to monitor the pressure regularly. Aim to check your tires at least once a month and before embarking on long trips.

Following these steps will help you maintain the optimal tire pressure on your Subaru Levorg, leading to improved safety, fuel efficiency, and a comfortable driving experience.