How to change oil in Hyundai ix35?

How to Change Oil in Hyundai ix35

How to Change Oil in Hyundai ix35

Regular oil changes are essential for the proper maintenance of any vehicle, including the Hyundai ix35. Changing the oil is a relatively simple process that should be performed every 5,000 to 7,500 miles or as recommended by the manufacturer. Follow these step-by-step instructions to change the oil in your Hyundai ix35 and keep it running smoothly.

Step 1: Gather the Necessary Tools and Materials

Before you begin, gather the following tools and materials:

• Hyundai-approved engine oil
• New oil filter
• Oil drain pan
• Ratchet wrench
• Oil filter wrench
• Funnel
• Shop towels or rags
• Socket set

Step 2: Prepare the Vehicle

Park your Hyundai ix35 on a level surface and engage the parking brake. Ensure the engine has been turned off for at least 10 minutes to allow the oil to cool down.

Step 3: Locate the Oil Drain Plug

Locate the oil drain plug underneath the engine. Use a socket set and a ratchet wrench to loosen and remove the plug. Place the oil drain pan beneath the plug to collect the old oil.

Step 4: Drain the Old Oil

Allow the old oil to fully drain from the engine. It is recommended to wait for approximately 10-15 minutes to ensure all the oil has been drained.

Step 5: Remove the Old Oil Filter

Using an oil filter wrench, remove the old oil filter located near the oil drain plug. Be prepared for some oil to spill out, so ensure the drain pan is still in place.

Step 6: Install the New Oil Filter

Apply a thin layer of oil to the rubber gasket of the new oil filter. Screw the new filter into place, but be careful not to overtighten it. Refer to the manufacturer's instructions for the correct torque specifications.

Step 7: Install the Drain Plug

After all the old oil has drained, reinstall the oil drain plug and tighten it securely with a ratchet wrench.

Step 8: Add Fresh Oil

Locate the oil cap on the top of the engine and remove it. Insert a funnel into the oil filler hole and carefully pour in the appropriate amount and type of Hyundai-approved engine oil. Refer to your vehicle's manual for the specific oil capacity.

Step 9: Check Oil Level and Secure Cap

Remove the funnel and wipe away any spills or drips. Use the dipstick to check the oil level and ensure it is within the recommended range. Once confirmed, securely reattach the oil cap.

Step 10: Dispose of the Used Oil Properly

Used oil is considered hazardous waste and must be disposed of in accordance with local regulations. Take the used oil and filter to a certified recycling center or an auto parts store that accepts used oil for proper disposal.

Conclusion

By following these steps, you can easily change the oil in your Hyundai ix35 and maintain the longevity and performance of your vehicle. Remember to adhere to the recommended oil change intervals and use Hyundai-approved engine oil for optimal results. Regular oil changes are a crucial aspect of vehicle maintenance, ensuring a smooth and efficient driving experience in your Hyundai ix35.