What are the common Asko washer error codes and how can I troubleshoot them effectively?

Common Asko Washer Error Codes and Troubleshooting

Asko washers may display error codes to indicate issues with the appliance. Here are some common error codes and troubleshooting steps:

1. F1 - Water inlet fault

   Check if the water inlet valve is clogged or faulty. Clean or replace as necessary. Also, ensure the water supply is turned on.

2. F2 - Drain fault

   Inspect the drain hose for clogs or kinks. Make sure the drain filter is clean. Check if the drain pump is working properly.

3. F3 - Overfill fault

   Ensure the water level sensor is functioning correctly. Check for blockages in the pressure hose. Look for leaks in the tub or hoses.

4. F4 - Overflow fault

   Check if the water inlet valve is stuck open. Inspect the pressure switch for proper operation. Verify that the drain pump is working.

5. F5 - NTC sensor fault

   Test the NTC sensor for continuity. Replace if faulty. Check the wiring connections to the sensor for any damage.

If you encounter any of these error codes on your Asko washer, follow the troubleshooting steps to identify and resolve the issue effectively.