What are some common troubleshooting codes for Asko washers and how can they be resolved?

Some Common Troubleshooting Codes for Asko Washers and How to Resolve Them

Error Code E01

This error code indicates a water inlet problem. To resolve it, follow these steps:

1. Check if the water supply is turned on and ensure there is sufficient water pressure.
2. Inspect the water inlet hose for any kinks, clogs, or leaks. Clean or replace if necessary.
3. Verify that the water inlet valve is functioning correctly. If it's faulty, it may need to be replaced.

Error Code E02

The E02 error code points to a drainage issue. Here's what you can do:

1. Make sure the drain hose is not kinked, clogged, or obstructed in any way.
2. Check the drain pump filter and remove any debris or foreign objects.
3. Ensure the drain pump is functioning correctly. If it's faulty, consider replacing it.

Error Code E03

This error code indicates a motor overload problem. Follow these troubleshooting steps:

1. Turn off the washer and unplug it from the power source.
2. Allow the motor to cool down for approximately 30 minutes.
3. Check if the drum is overloaded with laundry. Remove excess laundry and distribute it evenly in the drum.
4. After the cooling period, plug the washer back in and restart the cycle.

Error Code E04

The E04 error code signifies a door lock problem. Try these solutions:

1. Ensure the door is properly closed and latched. Open and close it firmly to check.
2. Inspect the door latch and locking mechanism for any damage or obstruction. Clean or replace if necessary.
3. Check the wiring connections between the door lock assembly and the control board. Secure or reconnect as needed.

Note:

If troubleshooting these common error codes does not resolve the issue, it is recommended to consult the Asko washer's user manual or contact a professional technician for further assistance.