What are the common problem codes displayed by the Asko washing machine and how can they be resolved?

Common Problem Codes and Troubleshooting for Asko Washing Machine

Common Problem Codes and Resolution for Asko Washing Machine

1. Error Code E01:

This code indicates a malfunction in the water supply and often occurs due to low water pressure or a blocked inlet hose. To resolve this issue, follow these steps:

• Check the water supply and ensure it is turned on.
• Inspect the inlet hose for any clogs or kinks. Remove any obstructions.
• Make sure the water pressure in your home is adequate.
• If the problem persists, contact Asko customer support for further assistance.

2. Error Code E02:

Error code E02 signifies a drainage problem. To resolve this issue, follow these steps:

• Check if the drain hose is properly connected and free from any kinks or blockages.
• Ensure the drain pipe is not clogged or obstructed.
• If using a drain pump, inspect it for any issues or blockages.
• Clear any obstruction preventing proper drainage.
• If the problem persists, contact Asko customer support for further assistance.

3. Error Code E03:

In case you encounter error code E03, it indicates an unbalanced load inside the washing machine. To resolve this issue, take the following steps:

• Stop the machine, redistribute the clothes inside to ensure proper balance, and then restart the cycle.
• Make sure to load the machine with evenly distributed items to prevent the imbalance from occurring.
• If the issue continues, there might be a problem with the machine's suspension system. Contact Asko customer support for further assistance.

4. Error Code E04:

Error code E04 points towards a door lock issue or a problem with the door switch. Follow these steps to address this problem:

• Check if the door is properly closed and locked. Open and close it again to ensure a secure latch.
• Inspect the door switch for any damage or faulty connections. Clean or replace if necessary.
• If the issue persists, there might be an internal problem with the door lock mechanism. Contact Asko customer support for further assistance.

5. Error Code E05:

Error code E05 relates to a temperature sensor malfunction. To troubleshoot, follow these steps:

• Check if the temperature sensor is properly connected and not damaged.
• Verify the wiring connections to the sensor are secure.
• If the temperature sensor is faulty, it may need replacement. Contact Asko customer support for further assistance.

Remember, if you encounter any other problem codes not listed here or the troubleshooting steps do not resolve the issue, it is recommended to reach out to Asko customer support for professional assistance.