What are the common error messages displayed by Asko washers, their meanings, and troubleshooting steps to resolve them?

Common Error Messages displayed by Asko Washers, their Meanings, and Troubleshooting Steps

Common Error Messages displayed by Asko Washers, their Meanings, and Troubleshooting Steps

Error Code 1: E1

Meaning: This error indicates a problem with the door lock mechanism.

Troubleshooting Steps:

1. Make sure the door is properly closed and latched.
2. Check for any obstructions around the door lock.
3. If the problem persists, the door lock assembly may need to be replaced. Contact Asko customer support for assistance.

Error Code 2: E2

Meaning: E2 error signifies a water filling issue.

Troubleshooting Steps:

1. Ensure that the water supply valves are fully open.
2. Check if the water inlet filters are clogged and clean them if necessary.
3. Inspect the water inlet valve for any faults. If faulty, consider replacing it.
4. Verify if the water pressure is within the recommended range. Low water pressure can cause filling problems.

Error Code 3: E3

Meaning: E3 error indicates a drainage issue.

Troubleshooting Steps:

1. Check for any blockages in the drain hose or the drain pump.
2. Make sure the drain hose is not kinked or clogged.
3. Inspect the drain pump for any damage or obstruction and clean it thoroughly.
4. If necessary, replace the drain pump or seek professional assistance.

Note: These are just a few common error codes. For a comprehensive list of error codes and further troubleshooting instructions, refer to the Asko washer's user manual or contact their customer support.