What are some common error codes for Asko washers and how can they be resolved?

Common Error Codes for Asko Washers and How to Resolve Them

Asko washers are reliable appliances, but like any machine, they can encounter issues from time to time. Error codes are displayed on the washer's control panel to help diagnose problems. Here are some common error codes for Asko washers and ways to resolve them:

Error Code E01

This code indicates a water supply issue. To resolve it:

1. Check if the water supply valves are fully open.
2. Make sure the water inlet hoses are not kinked or clogged.
3. Verify that the water pressure is sufficient.
4. Clean the filters in the water inlet valve if necessary.

Error Code E02

E02 points to a drain issue. Here's how to fix it:

1. Ensure the drain hose is not obstructed, kinked, or clogged.
2. Check for any blockages in the drain pump or drain filter.
3. Confirm that the drain hose is properly installed at the correct height.

Error Code E03

An E03 code indicates a malfunction in the motor or motor control unit. Follow these steps:

1. Turn off the washer and unplug it from the power source.
2. Let the washer rest for a few minutes.
3. Plug it back in, and restart the wash cycle. If the code reappears, contact a professional technician.

Error Code E04

E04 signifies a water overflow issue. Here's what to do:

1. Immediately turn off the washer and unplug it from the power supply.
2. Check if the water level sensor or pressure switch is faulty.
3. Verify that the drain pump is functioning correctly.
4. If the problem persists, get assistance from an Asko service center.

Remember, if you are unsure about any repairs or need additional help, it is always advisable to consult a professional Asko technician. They possess the expertise to diagnose and fix complex issues in your washer.