What is the recommended procedure for an oil change on the GLC 43 SUV?

What is the recommended procedure for an oil change on the GLC 43 SUV?

Performing regular oil changes is essential for maintaining the performance and longevity of your GLC 43 SUV. Follow the steps below to ensure a proper oil change:

1. Prepare the necessary tools and materials, including a socket wrench, oil filter wrench, oil catch pan, new oil filter, and the recommended oil for your vehicle.
2. Park your GLC 43 SUV on a level surface and engage the parking brake.
3. Locate the oil drain plug underneath the vehicle. Use the socket wrench to loosen the drain plug and carefully remove it, allowing the old oil to drain into the catch pan.
4. Once all the oil has drained, replace the drain plug and tighten it securely.
5. Locate the oil filter and use the oil filter wrench to remove it. Be cautious of hot surfaces.
6. Dispose of the old filter properly and apply a thin layer of new oil to the rubber gasket of the new filter. Install the new filter, hand tightening it until secure.
7. Refer to your owner's manual for the recommended oil capacity and locate the oil filler cap on the top of the engine. Remove the cap.
8. Using a funnel, slowly pour the recommended oil into the engine. Be careful not to overfill. Monitor the oil level using the dipstick as you pour.
9. Once the appropriate amount of oil has been poured, replace the oil filler cap.
10. Start the engine and let it run for a few minutes, allowing the new oil to circulate throughout the engine.
11. Turn off the engine and inspect for any leaks or abnormalities.
12. Check the oil level using the dipstick and add more oil if necessary.

Following these steps will ensure a proper oil change for your GLC 43 SUV. However, always consult your owner's manual for specific instructions and recommendations for your vehicle.