What is the recommended oil change procedure for the GLC 43 SUV?

What is the recommended oil change procedure for the GLC 43 SUV?

For optimal performance and engine longevity, it is essential to follow the recommended oil change procedure for the GLC 43 SUV. Here are the steps to ensure a successful oil change:

1. Park the GLC 43 SUV on a level surface and engage the parking brake.
2. Allow the engine to cool down for at least 10 minutes to prevent any burns.
3. Locate the oil drain plug underneath the vehicle and position an oil drain pan beneath it.
4. Using the appropriate tool, carefully loosen and remove the oil drain plug, allowing the old oil to drain completely.
5. Once the oil has fully drained, clean the drain plug and securely reattach it to the oil pan.
6. Proceed to locate the oil filter, typically found near the engine, and carefully remove it using an appropriate filter wrench.
7. Before installing the new oil filter, apply a thin layer of oil to the filter gasket for a proper seal.
8. Securely install the new oil filter to its designated position, ensuring it is tightly fitted.
9. Return to the oil drain plug and confirm it is tightly sealed.
10. Refer to the owner's manual to determine the vehicle's oil capacity and select the recommended oil type.
11. Using a funnel, pour the recommended amount of new oil into the engine.
12. After adding the oil, securely attach the oil cap.
13. Start the vehicle and let it run for a few minutes, allowing the oil to circulate throughout the engine.
14. Turn off the engine and check the oil level using the dipstick; add more oil if necessary.
15. Dispose of the old oil and filter responsibly or take them to a designated recycling facility.

By following these steps carefully, you can ensure a proper oil change for your GLC 43 SUV, promoting engine health and performance.