How to fix Whirlpool washer error E01 F03?

To fix the Whirlpool washer error E01 F03, follow the steps below: 1. Disconnect the washer from the power outlet and wait for a few minutes. 2. Inspect the water supply hoses to ensure they are not kinked or blocked. Straighten any kinks and remove any blockages if found. 3. Check the water inlet valve screens for debris. If clogged, clean the screens thoroughly. 4. Make sure the washer's water pressure is adequate. Ensure that the water valves are fully open and that the water supply is running correctly. 5. Examine the drain hose for any clogs or restrictions. Remove any debris blocking the hose. 6. Inspect the drain pump filter, which is usually located at the front bottom of the machine. Clean the filter if it is dirty or clogged. 7. Reconnect the washer to the power outlet and check if the error code has cleared. 8. If the error persists, it is recommended to contact Whirlpool customer service or a professional technician for further assistance. Please note that these steps are general guidelines, and following the specific instructions provided in your washer's manual is essential.