How to fix F28 error on Maytag washer?

How to Fix F28 Error on Maytag Washer

If you own a Maytag washer and are encountering the F28 error code, you’re in the right place. This article will guide you through the steps to fix the F28 error and ensure your washer is back up and running smoothly. The F28 error code on a Maytag washer indicates a communication error between the main control board and the motor control board.

Step 1: Check for Power Issues

Before diving into more intricate troubleshooting steps, it is essential to ensure that your Maytag washer is receiving adequate power. Follow the instructions below:

1. Make sure the washer is plugged in securely.
2. Check if the circuit breaker or fuse connected to the washer is properly functioning.
3. Verify that the power outlet has power by plugging in another appliance.

If you find any power issues, rectify them before moving on to the next step.

Step 2: Perform a Master Reset

Resetting your Maytag washer can help in resolving various errors, including the F28 code. Here’s how to perform a master reset:

1. Unplug the washer from the power outlet for at least one minute.
2. After a minute, plug the washer back in.
3. If the F28 error code persists, move on to the next step.

Step 3: Check the Wiring Connections

Loose or damaged wiring connections can often trigger the F28 error code. Follow these steps to examine your Maytag washer’s wiring:

1. Disconnect the washer from the power source.
2. Locate the main control board and motor control board inside the washer.
3. Inspect all wiring connections between the two boards.
4. If you find any loose connections or damage, carefully reconnect or replace the affected wiring.

Step 4: Inspect the Motor Control Board

If the wiring connections appear intact, the issue may lie with the motor control board itself. Here’s how to inspect the motor control board:

1. Disconnect the washer from the power source.
2. Locate the motor control board, usually found at the bottom of the washer.
3. Inspect the board for any visible signs of damage, such as burnt components or melted wires.
4. If you notice any damage, consider replacing the motor control board.

Step 5: Contact Customer Support

If none of the previous steps solve the F28 error code on your Maytag washer, it is recommended to get in touch with Maytag customer support or schedule a service appointment. They can provide further guidance and assistance to resolve the issue.

Remember, these steps are general guidelines to fix the F28 error on a Maytag washer. It is always advisable to consult the user manual specific to your washer model or reach out to the manufacturer's support for precise troubleshooting instructions.

We hope this article helped you resolve the F28 error code on your Maytag washer and get it back to its optimal performance!