LG washer drum not spinning, what could be the issue?

LG Washer Drum Not Spinning: Possible Issues and Troubleshooting Tips

LG Washer Drum Not Spinning: Possible Issues and Troubleshooting Tips

Having your LG washer's drum not spinning properly can be frustrating, as it directly affects the washing and drying process. In this article, we will explore some common issues that may be causing the problem and provide troubleshooting tips to help you resolve the issue.

Possible Causes of the Drum Not Spinning

1. Broken Drive Belt: The drive belt connects the motor to the drum, enabling it to spin. If the belt is broken, worn out, or loose, it won't be able to transfer power to the drum, resulting in a spinning issue.

2. Faulty Door/Lid Switch: LG washers are equipped with door or lid switches that prevent the drum from spinning if the door or lid is not securely closed. If the switch is faulty, the washer may not register the door being shut and won't initiate the spinning cycle.

3. Malfunctioning Motor: A malfunctioning motor can also be a possible cause for the drum not spinning. If the motor is defective or burnt out, it won't be able to generate the necessary power to rotate the drum.

4. Clogged Drain Pump Filter: A clogged drain pump filter can restrict water drainage from the drum, causing an imbalance that prevents the drum from spinning. It is essential to clean the filter regularly to avoid this issue.

5. Broken Motor Coupling: The motor coupling connects the motor to the transmission and enables the drum to spin. If the coupling is damaged or broken, it will hinder the spinning motion.

6. Unbalanced Load: Overloading the washer or improperly distributing the clothes inside the drum can cause an unbalanced load, which triggers the washer's automatic safety feature to prevent spinning. The washer may stop spinning to prevent damage caused by excessive vibrations.

Troubleshooting Tips

1. Check the Drive Belt: Inspect the drive belt for any signs of damage, wear, or looseness. If it appears worn out or broken, you will need to replace it. Refer to the manufacturer's guide for instructions on how to replace the drive belt.

2. Test the Door/Lid Switch: Make sure the door or lid is closing securely. If the drum doesn't spin even when the door is securely closed, the switch might be faulty and needs to be replaced by a professional technician.

3. Inspect the Motor: If you suspect a faulty motor, it is advisable to contact a service technician for a thorough diagnosis. They will be able to test the motor and determine if a replacement is necessary.

4. Clean the Drain Pump Filter: Locate the drain pump filter and remove any debris or lint trapped inside. This will help facilitate proper water drainage and prevent imbalance issues.

5. Check the Motor Coupling: Inspect the motor coupling for any visible damage. If it appears broken or worn out, you will need to replace it to ensure proper drum spinning.

6. Ensure Proper Loading: Avoid overloading the washer and distribute the clothes evenly inside the drum. Unevenly distributed loads can trigger the unbalanced load feature, causing the drum not to spin. Adjust the load if needed and try again.

If you have followed the troubleshooting tips above and the problem persists, it is recommended to contact a qualified appliance repair technician or LG customer support for further assistance. They possess the expertise to diagnose and repair complex issues with LG washers.

Remember, safety should always be a priority when dealing with electrical appliances. If you are uncertain or uncomfortable performing any of the troubleshooting steps, seek professional help.

By addressing the possible causes and following the troubleshooting tips provided, you should be able to identify and resolve the issue of your LG washer drum not spinning properly.