How do you clear the H2O code on a GE dishwasher?

The "H2O" code on a GE dishwasher typically indicates that there is a water supply issue. This can be caused by a number of things, such as a clogged inlet screen, low water pressure, or a faulty water inlet valve. To resolve the issue, check the inlet screen and clean it if necessary, make sure the water supply to the dishwasher is turned on and not restricted, and test the water inlet valve to see if it is functioning properly. If none of these steps resolve the issue, it may be necessary to call a professional for further assistance.

Here are some steps to help fix the "H2O" code on a GE dishwasher:

1. Check the inlet screen: Locate the water inlet valve on the dishwasher, which is usually located near the back of the machine. Remove the inlet hose and check the screen for debris or sediment. Clean the screen if necessary.
2. Verify water supply: Make sure the water supply to the dishwasher is turned on and not restricted. Check that the water shut-off valve is open and that the water pressure is sufficient.
3. Test the water inlet valve: The water inlet valve is responsible for bringing water into the dishwasher. Test the valve to see if it is functioning properly. If the valve is faulty, it will need to be replaced.
4. Check for leaks: Look for any visible leaks or damage to the water supply hoses. If a leak is found, the hose will need to be replaced.
5. Test the dishwasher: Run a test cycle to see if the "H2O" code has been resolved.

If none of these steps resolve the issue, it may be necessary to contact a professional for further assistance.

Note that some models have a different troubleshooting steps and it is always recommended to check the user manual for specific troubleshoot steps.